• PO BOX 6446 North Ryde NSW 2113

    FCS Concrete Repairs Pty Ltd
    ABN 68 602 061 709

  • Call us 02 8203 4568

  • Email Address info@fcsconcreterepairs.com.au

    Certifications - Jaz AnzCertifications - SafetyCertifications - QualityCertifications - Environmental

    Posts by RicardoWebDev

    FEATURED PRODUCTS: Fosroc® Nitofill LV

    May 24th, 2018 Posted by Uncategorized 0 thoughts on “FEATURED PRODUCTS: Fosroc® Nitofill LV”

    Product Description

    Low viscosity, dual cartridge, epoxy crack-injection system

    Uses

    Nitofill LV is designed for injecting cracks in concrete and masonry where there is a need to consolidate a structure or exclude water and air from contact with the reinforcement.

    Nitofill LV is a high strength, low viscosity resin injection system and provides excellent bond to concrete and masonry.

    The Nitofill LV system is ideal for small scale repairs on site and is also suitable for insitu or precast concrete elements.

    Advantages

    • n Suitable for structural crack repairsn Low viscosity allows penetration into the finest cracksn Non-shrink, adheres with no loss of bond

      n System includes everything necessary to complete the crack injection

      n Convenient to use, disposable cartridge pack contains both base and hardener

      n Cost effective and efficient repair

    FEATURED PRODUCTS: Sikadur®-52 LV

    May 24th, 2018 Posted by Uncategorized 0 thoughts on “FEATURED PRODUCTS: Sikadur®-52 LV”

    PRODUCT DESCRIPTION

    Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required.  It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

    Uses

    Sikadur-52 may be used to inject and fill cracks between 0.2 – 5 mm wide in a wide variety of constructions applications.

    Sikadur-52 does not shrink on curing and forms a rigid, high strength product which exhibits excellent adhesion to most construction materials enabling the restoration of structural adequacy to columns, beams, foundations, decks and water retaining structures.

    Due to its highly penetrative nature Sikadur-52 is ideally suited for application as a primer beneath Sikadur epoxy mortars or Sikafloor mortars and coatings on dense substrates.

    Sikadur-52 may also be used to stabilise weak and friable substrates.

    Special high strength grades can be made to order.

    ADVANTAGES

     Shrink free

     Insensitive to moisture during application, cure or whilst in service

     Applicable over wide temperature range

     Low viscosity

     Excellent adhesion to most building materials even when damp

     Proven in service

     High tensile and flexural strength

     Supplied in factory proportioned units

     High early strength  Chemical resistant

    FEATURED PRODUCTS: PRIME FLEX 900 XLV

    May 24th, 2018 Posted by Uncategorized 0 thoughts on “FEATURED PRODUCTS: PRIME FLEX 900 XLV”

    Product Description

    Prime Flex 900 XLV polyurethane resin is a low viscosity, hydrophilic resin that reacts with water and expands to form a closed cell, watertight foam. It is typically injected under pressure to seal actively leaking joints and cracks in concrete structures, including hairline cracks. This product is independently tested and proven to meet NSF/ANSI Standard 61.5 for contact with potable water.

    Recommended Uses

    • Injecting hairline cracks, expansion joints, wide cracks, pipe joints, or pipe penetrations
    • Sealing active leaks in above- or below-grade concrete structures
    • Oil-free oakum or open cell backer rod may be soaked in Prime Flex 900 XLV to create a watertight gasket

    Advantages

    • NSF/ANSI Standard 61.5 compliant for contact with potable water
    • Single-component. No catalyst or accelerators needed. Pump material straight out of the pail.
    • Extremely tough and flexible. Can expand and contract parallel to the crack in varying temperatures.
    • Up to 600% expansion (unconfined)
    • Low viscosity will penetrate tight cracks

     

    Copyright © 2016 FCSConcreteRepairs.com.au. All rights reserved. Website by YourVDesk.com.